It has an HDMI 1.3 Input/output > 자유게시판

Ultra High Speed HDMI cables are backwards compatible with older HDMI devices, and older cables are compatible with new HDMI 2.1 devices, though the full 48 Gbit/s bandwidth is only supported with the new cables. Versions 1.3 and 2.0 added support for 1080p 60 Hz (Y′CBCR 4:2:2) with a bandwidth of 3 Gbit/s in PackedPixel mode. The PowerBook 3400c and lower-end Power Macs also added 10BASE-T. The Power Macintosh 7300/8600/9600 were the final Macs to include AAUI, what is control cable and 10BASE-T became universal starting with the Power Macintosh G3 and PowerBook G3. New machines were added to the network by plugging them in and optionally giving them a name. The filler has a distinct purpose of giving the cable a distinct shape and form. SMA RF connectors can come in the form of a single connector which, when engineered for the task at hand, can help provide the crucial connection needed within a client’s existing system.

Controller connectors designed perfectly for the machine specified. This was essentially a replacement for Apple's connector that had conventional phone jacks instead of Apple's round connectors. Introduced for the newly released Macintosh II computer, one of Apple's first two Macintoshes with expansion slots (the Macintosh SE had one slot of a different type), the operating system included a new Network control panel that allowed the user to select which physical connection to use for networking (from "Built-in" or "EtherTalk"). These included updates to EtherTalk and TokenTalk, AppleTalk software and LocalTalk hardware for the IBM PC, EtherTalk for Apple's A/UX operating system allowing it to use LaserWriters and other network resources, and the Mac X.25 and MacX products. This could be as simple as a network of Ethernet Mac II's trying to talk to a LaserWriter that only connected to LocalTalk. By 1987, Ethernet was clearly winning the standards battle over Token Ring, and in the middle of that year, Apple introduced EtherTalk 1.0, an implementation of the AppleTalk protocol over the Ethernet physical layer. Over time, many third-party companies would introduce compatible Ethernet and Token Ring cards that used these same drivers. Token Ring would later be supported with a similar TokenTalk product, which used the same Network control panel and underlying software.

§C The Consumer Electronics Control (CEC) capability allows HDMI devices to control each other when necessary and allows the user to operate multiple devices with one handheld remote control device. HDMI Forum, Inc (Press release). In our opinion, DisplayPort 1.2 is the future interface for PC monitors, along with HDMI 1.4a for TV connectivity. This FriendlyNet system was based on the industry-standard Attachment Unit Interface or AUI, but deliberately chose a non-standard connector that was smaller and easier to use, which they called "Apple AUI", or AAUI. At introduction, Ethernet interface cards were available from 3Com and Kinetics that plugged into a Nubus slot in the machine. SEAGATE was commercialized by Kinetics in their LocalTalk-to-Ethernet bridge as an additional routing option. A number of companies responded, including Hayes and a few newly formed companies like Kinetics. A few years later, MacIP was separated from the SEAGATE code and became the de facto method for IP packets to be routed over LocalTalk networks. For socket numbers, a few well-known numbers were reserved for special purposes specific to the AppleTalk protocol itself. This was the only part of AppleTalk that required periodic unsolicited broadcasts: every 10 seconds, each router had to send out a list of all the network numbers it knew about and how far away it thought they were.

Apart from these, all application-level protocols were expected to use dynamically-assigned socket numbers at both the client and server end. Of these, only the network number required any configuration, being obtained from a router. Apple has led the development of many such efforts, from the introduction of the AirPort router to the development of the zero-configuration networking system and their implementation of it, Rendezvous, later renamed Bonjour. With the purchase of NeXT and subsequent development of Mac OS X, AppleTalk was strictly a legacy system. In 1984, Bill Croft at Stanford University pioneered the development of IP packets encapsulated in DDP as part of the SEAGATE (Stanford Ethernet-AppleTalk Gateway) project. By 1986, Columbia University released the first version of the Columbia AppleTalk Package (CAP) that allowed higher integration of Unix, TCP/IP, and AppleTalk environments. PhoneNet allowed AppleTalk networks to be connected together using normal telephone wires, and with very little extra work, could run analog phones and AppleTalk on a single four-conductor phone cable. The appearance of a Macintosh with a direct Ethernet connection also magnified the Ethernet and LocalTalk compatibility problem: Networks with new and old Macs needed some way to communicate with each other. However, the physical wiring used by these networks was not yet completely standardized.